Max AWM-495V3 Wireless Microphone

Name: Max AWM-495V3 Wireless Microphone - Evertops Kenya
Price: 8500.00 KES
Availability: InStock

KSh 8,500.00

Key Specifications

Here are the specifications for the AWM-495V3 system or closely related variants:

Component / Property	Detail
System Type	Dual-channel VHF wireless microphone system (one handheld + one body-pack/clip transmitter)
RF Output Power	Up to 15 mW (max.) for each transmitter
Modulation Mode	FM (F3E)
Microphone Element (Handheld)	Dynamic — cardioid pickup pattern
Microphone Element (Body-pack / Clip)	Usually a small condenser, omnidirectional type (for more flexible placement)
Frequency Response (Handheld)	Approx. 50–12,000 Hz
Frequency Response (Body-pack / Clip)	Approx. 80–15,000 Hz (when using condenser element)
Dynamic Range	~ 80 dB (both transmitters)
Signal-to-Noise Ratio / Audio Output	S/N ratio > 80 dB; receiver audio output ~ 0–55 mV / 1 kΩ per channel, or mixed.
Distortion	< 0.5% (under nominal conditions)
Power / Batteries (Transmitters)	Each transmitter runs on 2 × 1.5 V “AA pencil cells” (≈ 3 V total)
Receiver Power / Adapter	Receiver typically powered via AC adapter (e.g. mains 240 V → 12 V DC) supplied with unit.
Receiver Antennas	Two telescopic antennas (for better reception), while transmitters use internal antennas.
Receiver Outputs	two separate outputs (Channel 1, Channel 2) + a mixed output (Channel 1 + 2) — useful for mixing multiple mic signals.

The AWM-495V3 is a dual-channel VHF wireless microphone system — typically including a handheld (dynamic) transmitter plus a body-pack or secondary transmitter.
It’s intended for general PA use: stage talks, events, small auditoriums/venues, places of worship, seminars, or public-address applications.

Here are the specifications for the AWM-495V3 system or closely related variants:

Component / Property	Detail
System Type	Dual-channel VHF wireless microphone system (one handheld + one body-pack/clip transmitter)
RF Output Power	Up to 15 mW (max.) for each transmitter
Modulation Mode	FM (F3E)
Microphone Element (Handheld)	Dynamic — cardioid pickup pattern
Microphone Element (Body-pack / Clip)	Usually a small condenser, omnidirectional type (for more flexible placement)
Frequency Response (Handheld)	Approx. 50–12,000 Hz
Frequency Response (Body-pack / Clip)	Approx. 80–15,000 Hz (when using condenser element)
Dynamic Range	~ 80 dB (both transmitters)
Signal-to-Noise Ratio / Audio Output	S/N ratio > 80 dB; receiver audio output ~ 0–55 mV / 1 kΩ per channel, or mixed.
Distortion	< 0.5% (under nominal conditions)
Power / Batteries (Transmitters)	Each transmitter runs on 2 × 1.5 V “AA pencil cells” (≈ 3 V total)
Receiver Power / Adapter	Receiver typically powered via AC adapter (e.g. mains 240 V → 12 V DC) supplied with unit.
Receiver Antennas	Two telescopic antennas (for better reception), while transmitters use internal antennas.
Receiver Outputs	two separate outputs (Channel 1, Channel 2) + a mixed output (Channel 1 + 2) — useful for mixing multiple mic signals.

The AWM-495V3 works well for:

Live sound / public speaking: Events, worship services, seminars, community halls, public announcements — where you want wireless mobility and basic vocal coverage.
Small–medium venues: Since it’s dual-channel and fairly simple, it’s a good fit for small auditoriums or multi-speaker setups (e.g. two presenters, speaker + piano / instrument).
Flexible mic placement: Having both a handheld (for singing / speeches) and a body-pack/clip transmitter (for lavalier or instrument mic) adds flexibility.
Budget / entry-level wireless setups: If you don’t need ultra-high fidelity or advanced features (diversity antennas, multi-band, digital transmission), this gives a wireless option at lower cost.