POWER Gold Automatic Voltage Regulator 2000VA

KSh 6,700.00

Specification	Typical Value / Range
Rated Capacity	2000 VA (≈ 2 kVA)
Usable Power (Watts)	Usually lower than VA (because of power factor). For example ~ 1200‑1600 W depending on load and power factor.
Input Voltage Range	Approx 140‑260 V (sometimes wider, e.g. 110‑280 V), to allow for both low and high fluctuations.
Output Voltage	~ 220‑240 V (as per local standard) stabilized; sometimes ±5‑10% tolerance.
Frequency	50 Hz
Response / Correction Time	Usually fast; some listed <1 second for substantial fluctuations.
Efficiency	They are fairly efficient, e.g. 90‑98% in good models.
Fuse / Overload Protection	Fuses or breakers to protect from overload, short circuit etc.
Other Protections	Overvoltage cutoff, undervoltage cutoff, thermal protection, delay at power on (to avoid surges), short circuit protection.
Indicators / Display	LED or digital display showing input and output voltages, status (normal / low / high / fault).
Construction	Strong casing, ventilation for cooling, possibly transformer (relay type or servo type), sometimes toroidal transformer for better efficiency.
Operating Conditions	Ambient temperature range ~ ‑5‑40°C or 0‑40°C, humidity non‑condensing; often indoor installation.

Specification	Typical Value / Range
Rated Capacity	2000 VA (≈ 2 kVA)
Usable Power (Watts)	Usually lower than VA (because of power factor). For example ~ 1200‑1600 W depending on load and power factor.
Input Voltage Range	Approx 140‑260 V (sometimes wider, e.g. 110‑280 V), to allow for both low and high fluctuations.
Output Voltage	~ 220‑240 V (as per local standard) stabilized; sometimes ±5‑10% tolerance.
Frequency	50 Hz
Response / Correction Time	Usually fast; some listed <1 second for substantial fluctuations.
Efficiency	They are fairly efficient, e.g. 90‑98% in good models.
Fuse / Overload Protection	Fuses or breakers to protect from overload, short circuit etc.
Other Protections	Overvoltage cutoff, undervoltage cutoff, thermal protection, delay at power on (to avoid surges), short circuit protection.
Indicators / Display	LED or digital display showing input and output voltages, status (normal / low / high / fault).
Construction	Strong casing, ventilation for cooling, possibly transformer (relay type or servo type), sometimes toroidal transformer for better efficiency.
Operating Conditions	Ambient temperature range ~ ‑5‑40°C or 0‑40°C, humidity non‑condensing; often indoor installation.